What
makes the Architect’s Birdfeeder different? |
It’s fun to put together! And unlike most birdfeeders,
the Architect’s Birdfeeder comes in a low impact
small box, packs flat, requires not tools or fasteners
for assembly and can be taken apart and re-assembled
with ease. The feeder is also easy to clean with a damp
soapy washcloth.
|
|
Where
should I put the Architect’s Birdfeeder? |
The Architect’s Birdfeeder has been designed
to hang from an outside object like a tree. We suggest
hanging the Architect’s Birdfeeder far enough
from the ground or other branches to keep it away from
pesky creatures. Also keep in mind you’ll want
to watch the birds so hang it near a window and you
can watch the birds flock to it!
|
|
What
kind of birdseed should I use? |
Seed that is a mix of millet and sunflower works best
for flow.
|
|
How
do you keep water out of the Architect’s Birdfeeder? |
You will notice the roof of the Architect’s Birdfeeder
is slightly pitched. This is to keep water running off
the roof. You will also notice the slight reveal on
the underside of the roof piece. The reveal should be
face down (see step 9 in the directions). This is a
drip edge which will help to cause water that runs along
the underside of the roof to fall away. We have also
added two notches to each wing piece that serve as additional
drip edges. Finally we've added a very narrow slot where
the long and short pieces converge which helps to air
the seed out if water does get in.
|
|
What
kind of birds can I expect at the Architect’s Birdfeeder? |
Based on the size of the Architect’s Birdfeeder
smaller birds tend toward using it. At home in the Northeast
among others, we have had chickadees, sparrows, junco's,
tufted titmice, nuthatch & even woodpeckers.
|
|
What
is the Architect’s Birdfeeder made of? |
The Architect’s Birdfeeder is made of very strong
thermoplasic polymer called polycarbonate. The same
stuff that bullet proof glass is made of!
|
|
How
can I get in contact with the Architect’s Birdfeeder
,llc. ? |
|
|
Can
I return the Architect’s Birdfeeder? |
We want to make sure you are happy with the Architect’s
Birdfeeder. If you are not satisfied, send it back to
us for a full refund. Please do so within 30 days. Please
contact us to discuss options.
|
|
How
do I assemble the Architect’s Birdfeeder? |
The Architect’s Birdfeeder
comes with easy to assemble directions.  Click
the PDF icon to download assemble directions. In
addition, use the movie on the homepage to go step by
step through the process. The movie can be paused and
played at your discretion.
|
|
can
I pay without using a paypal account? |
|
|
|
 |
